Wednesday, July 27, 2011

Safety Mechanisms: Integrated Trigger Safety

In our last post, we looked at Grip Safety Devices. In this post, we will look at something similar, the Integrated Trigger Safety device. This device really became popular because of Glock pistols, and other manufacturers such as Springfield Armory and Smith & Wesson also offer some models with this feature.

 Public domain image. Click on image to enlarge.

The above image shows a typical Glock 17 Generation 2 pistol. If you were to click on the image to enlarge it, pay attention to the trigger assembly and notice that it seems a little thicker towards the bottom. That is because the trigger has a small spring loaded lever embedded into the lower half of the trigger. This is the integrated trigger safety device.

Similar to the grip safety, this spring loaded lever is automatically depressed by the user as a natural consequence of the user's actions, in this case, pulling the trigger. When the lever is depressed, it unlocks the main trigger and allows it to move. One cannot move the main trigger without depressing the small lever fully.

There are two additional safety devices built into Glock pistol models, which are also activated and deactivated by the trigger movement. One of these devices is a drop safety device. This guides the trigger bar in a ramp and it only releases by the rear-ward movement of the trigger. The other device is a firing pin safety, which is a small steel pin that sits in between the firing pin and the cartridge. The firing pin cannot strike the cartridge primer with the steel pin in the way. This steel firing pin safety device only drops out of the way, when the trigger is pulled. These devices get deactivated as a natural consequence of the trigger being pulled and are reactivated when the trigger is released.

Therefore, if the user were to drop the pistol accidentally, the safety devices would automatically activate and hopefully prevent the firearm from discharging. This design found widespread popularity among many users, who prefer not to move any manual lever or button to activate and deactivate the safety. The firearm still goes bang when the user pulls the trigger, but not if it were to be accidentally dropped.

Since Glock pistols became very popular, some other manufacturers took notice and used a similar feature in some of their products.

1 comment:

  1. Notwithstanding the popularity of the integrated trigger safety since Glock began marketing its pistols in the mid-1980's, one of the problems I see is that some people are under the false impression that this so-called "trigger safety" prevents accidental discharge when the user's finger or some object makes inadvertent contact with the trigger. It does not. The integrated trigger safety is nothing more than a drop safety.

    ReplyDelete